| Task: | Adjust |
|---|---|
| Structure: | Open-Loop |
| Signal: | Continuous |
| Function: | Automatic Control, Protection |
| Certification: | ISO: 9001, CE |
| Condition: | New |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Model | DC12/48RT100BL-XW |
| Volt | 12-48VDC |
| Rated current | 50A |
| Max current | 100A |
| work mode | Speed mode |
| Control mode | 0-10V,0-5V,potentiometer |
| Protection | over current,over voltage |
| Suitable | brushed pm dc motor |
| Impulse input range | 500Hz-5000Hz |
| Temperature | -10ºC-- +60ºC |
| Weight | 0.9kg |
| D imension | 210*115*63 mm |
| Application | Equipments |
PRODUCT DESCAPTION
This driver uses high-performance MCU, adopts advanced motion control algorithm and is applicable to situations having special functional requirements and has external analog quantity, pulse-width control and potentiometer speed governing functions.DC12/48RT100BL-XW is a kind of intelligent high-power DC motor driver.
It can sets soft start and stop as well as maximum current and motor torque, separately selects forward and backward rotations of motor and separately controls forward limit and backward limit.
This driver is also equipped with fault alarm output end to effectively protect the reliability and safety of device package and can be widely used in automation control industry.
|
1. PULSE WIDTH MODULATION Motor runs quieter, with greater efficiency and less maintenance, longer life. |
| 2. SMT technology, small size |
|
3. Low noise during operation, high efficiency, and low maintenance cost which better enhance the service life of DC motor. |
| 4. ENABLE / BRAKE / DIRECTION TERMINALS Choose a function by simply opening or closing a dry contact or through an open collector transistor. |
| 5. STATUS LEDs Power and Fault LEDs provide a visual status of the drive. |
|
6. Forward and reverse can be set separately It doesn't need external reversing contactor and will not result in electric motor parts or other components overheating or burning down. |
| 7. Output current can be set |
| 8. Torque compensatio |
| 9. Standard analog control mode: Analog:0-5V or potentiometer |
| 10. Over voltage & less voltage protection |
|
11. OVER TEMPERATURE PROTECTION Drive will fold the output power back to prevent from overheating. Drive will fault if it still remains too hot. |
| Model | Rated volt/V | Continue current | Max current | Controller mode | Regeneration |
| DC24/20BL-4Q02 | 24V | 10A | 20A | Potentiometer, PWM, 0-5V | NO |
| DC36/20BL-4Q02 | 36V | 10A | 20A | Potentiometer, PWM, 0-5V | NO |
| DC48/20BL-4Q02 | 48V | 10A | 20A | Potentiometer, PWM, 0-5V | NO |
| DC12/30BL-4Q02 | 12V | 15A | 30A | Potentiometer, PWM, 0-5V | NO |
| DC24-48RT10BL | 24-48V | 5A | 10A | Potentiometer, PWM, 0-5V | NO |
| DC12/48RT50BL-XW | 12-48V | 25A | 50A | Potentiometer, PWM, 0-5V | NO |
| DC12/48RT100BL-XW | 12-48V | 50A | 100A | Potentiometer, PWM, 0-5V | NO |
| DC12/24/48RT10BL | 12/24/48 | 5A | 10A | Potentiometer, PWM, 0-5V | Yes |
| DC12/24/48RT15BL | 12/24/48 | 8A | 15A | Potentiometer, PWM, 0-5V | yes |
| DC12/24/48RT30BL | 12/24/48 | 15A | 30A | Potentiometer, PWM, 0-5V | Yes |
| DC12/24/48RT50BL | 12/24/48 | 25A | 50A | Potentiometer, PWM, 0-5V | Yes |
| DC12/24/48RT100BL | 12/24/48 | 50A | 100A | Potentiometer, PWM, 0-5V | Yes |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}