115/230VDC Reversible Regen DC Motor Controller

• Customization: Available
• Task: Adjust
• Structure: Open-Loop
• Model NO.: 115/230RT10AL-02
• Signal: Continuous
• Function: Automatic Control, Protection, Monitoring
• Certification: ISO: 9001, CE
• Condition: New
• Customized: Customized
• Material: Aluminum Alloy
• Working Mode: Speed Mode
• Operating Voltage: AC 115V/230V
• Adaptable Motor Power: 450W/1000W
• Control Melthod: 0-5V Potentiometer
• Transport Package: Carton
• Specification: 116*103*48 mm
• Trademark: keya
• Origin: China
• HS Code: 9032899090
• Production Capacity: 10000yr
• Package Size: 20.00cm * 20.00cm * 10.00cm
• Package Gross Weight: 0.500kg

Product Description

Product Description

 

115/230VDC Reversible Regen DC Motor Controller

MMT-115/230DR Series DC motor driver is a kind of speed governing product developed and produced by adopting past successful experience and combining modern advanced technology. This series of products have met international standard requirements and are sold to many countries. This driver adopts thyristor chopping control principle and uses independent trigger mode. Even there is no velocity feedback, high speed ratio can be achieved to make it more accurate and reliable.
Excellent performance, reliable quality and high cost performance make it a strong performer in DC motor driver field and it was widely used in plastic machinery, food machinery, cable equipment, machining, paper printing, testing equipment, laboratory equipment and mixing equipment, etc.
 

 

 Product characteristics

1. SMT technology, small size
2. Good following features, rapid respond speed
3. Wide speed ratio, strong mechanical features
4. Applicable to permanent magnet ,separate excitation type and DC torque motor
5. Double closed-loop PI regulation (Voltage, current)
6. Current setting and current-limiting protection (continuous operation setting current)
7. Large low speed output moment
8. Over-current protection function
9. Quick stop function
10. Arbitrary setting of upper and lower speed
11. Soft start, soft stop setting function
12. Selection of speed mode, torque mode
13. Normally open, close selection of enable signal
14. Selection of input, output voltage switch
15.Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer

 Product performance

1.Strong mechanical features, static rate is 1%.
2.Wide speed governing range (0-MAX SPD setting value)
3.Rapid dynamic response process
4.Automatic smooth transition process during speed up and cut.
5.Good excavation features which automatically limit over-current within the range of set value.
6.High reliability, compact structure, extremely high cost performance

Product Parameters

 

Model	115/230DR10AL-02
Operating Voltage	AC 115V/230V
Ultimate Supply Voltage	AC 115.220V
Adaptable Motor Power	450W/1000W
Rated Speed	10A
Instaneous Max. Current	30A
Overcurrent Time	0.1s over-current protection
Working Mode	Speed Mode
Control Method	0-5v, potentionmeter
Controllable Speed Range	0-Max speed
Dimension	116*103*48mm
Weight	0.45kg
Cooling Method	Natural Cooling
Operating Temperature	-25ºC-+60ºC
Storage Temperature	-35ºC-+65ºC
Insulating Properties	The output and input are insulated to DC 600Vfrom the chassis,leakage current is0.007mA, insulation resisitance is above 20MΩ.
Protective Properties	Dust-proof, Moisture-proof, Salt Spray-proof
Protective Function	Abnormalitise like over current, overheating, over voltage, less voltage and short circuit will start the protection function.

Drawing

 

Product Application

 

Certifications

After Sales Service

Pre-service	After Sales Service
Inquiry and Consult Support  Sample testing Support View our Factory	Help  instal and use the product 24 hours online problem solving

Packaging & Shipping

☆Standard export carton with sponge
☆ Size : base on the order
☆ Weight : base on the order
☆ Detail data will be confirmed before shipping