24V 50A Dual Channel Brushless Servo Motor Speed Controller

• Customization: Available
• Task: Adjust
• Structure: Closed-Loop
• Model NO.: KYDBL4850-2E
• Signal: Continuous
• Function: Automatic Control, Protection
• Certification: ISO: 9001, CE
• Condition: New
• Customized: Customized
• Material: PCB
• Volt: 10-55VDC
• Current: 50A
• Working Mode: Speed Mode. Torque Mode; Position Mode
• Control Method: RS232 Can
• Protection Level: IP20
• Warranty: 1 Year
• Transport Package: Carton
• Specification: 148*117*40mm
• Trademark: keya
• Origin: China
• HS Code: 9032899090
• Production Capacity: 100000/Year
• Package Size: 20.00cm * 20.00cm * 10.00cm
• Package Gross Weight: 3.000kg

Product Description

Brushless dc motor speed controller KYDBL4850-2E

Product Description

 III. Product Features:
Wide-range voltage input, 10-55V.
Intelligent PID control loop.
Working mode: Speed open-loop, close-loop control, torque close-loop control, position close-loop control.
External potentiometer, 0-5V analog quantity or pulse command control mode, RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode.
Safety forward & reverse control, four-quadrant operation, support regeneration.
Enable control function.
Maximum current control.
4-way input port; the function can be defined as analog input, pulse input or digital input functions.
6-way digital (MOS tube open-drain) output, which can serve as the failure alarm
status output of controller and can control the external relay to realize actions such
as automatic disconnection of power.
Abnormalities like overcurrent, overheating, overvoltage and short circuit will start the protection function.
LED status indicator.
CAN bus communication, see the detailed communication protocol when using it.
RS232 communication, see the detailed communication protocol when using it.
IV. Performance Index:
1. Power voltage: 10-55VDC.
2. At the ambient temperature 25ºC, continuous working current 30A, transient current up to 75A 30S.
3. Minimum speed: 10 RPM in the speed close-loop mode; 1 RPM in the position mode.
4. Out+5VDC power (It can power up the encoder): 5V DC  20mA
5. Analog input range: 0-- 5VDC
6. Impulse input range: 500Hz-5000Hz (corresponding maximum speed)
[Note] The minimum impulse frequency may change along with the setting of maximum speed.
7. Input range of duty ratio 0%-- 100% (input frequency range f ≤1KHz, recommend to use the frequency of 250Hz).
8. Temperature protection status: When the temperature is 70ºC, the controller will reduce output by overheating protection and will stop output when the temperature is 80ºC.
9. Working temperature: -20ºC-- +60ºC.
10. Ambient humidity: Relative humidity≤80RH.
11. Boundary dimension: L * W * H = 190mm * 130mm * 40mm
11. Weight: 800g
V. Boundary Dimension: L*W*H=190*130*40  Unit: mm.

 

Product Parameters

 

Model	KYDBL4850-2E
Volt	10-55VDC
Rated current	30A
Max current	50A
work mode	Spped mode,Torque mode,Postion mode
Feed back	incremental encoder feedback,hall sensor feedback
Control mode	CAN,RS232,PWM,CLK,RC,0-5V,potentiometer
Protection	over current,over voltage
software	CAN,RS232
Suitable	brushless dc servo motor,brushless servo motor
Impulse input range	500Hz-5000Hz
Temperature	-10ºC-- +60ºC
Weight	1kg
D imension	148*117*40mm
Application	Fire Robot,Medical robot,AGV,Service Robot

Detailed Photos