| Product Name |
Brushless dc controller |
| Model |
KYDBL2430-1E |
| Color |
RED |
| VOLT |
10-55V |
| CURRENT |
30A |
| CONTROL |
0-5V,RS232,CAN |
| ENCODER |
SPEED CLOSE LOOP |
| USED |
VEHICLE,HUB MOTOR |
MMT -KYDBL2430-1E is a kind of intelligent brushless dc motor controller.The use of high-performance 32-bit MCU controller, adopts the advanced control algorithms, coordinate external quadrature encoder input to complete the open loop and closed loop speed, under the closed loop torque of motor sport.Controller with multiple analog input port, the pulse input port and digital I/O port
Wide input voltage.
Pieces of intelligent PID control loop.
Four works: open loop control, closed loop speed control, open loop and closed loop torque control.
Pieces of external potentiometer, external 0 to 5 VDC analog, pulse command control mode, the RC control mode.
Safety of forward & reverse control, four quadrant operation, support regeneration.
Mixer can make control function.
In pieces the maximum current limit.
Pieces of 4 road input port, the function may be defined as analog input, pulse input or digital input function.
MOS tube drain open circuit output mixer 2 road, generally as 24 v 1 a output (maximum load capacity of 40 v 1 a), can be used to control relay coil or other attachments.
Over-current, overheating, overvoltage, undervoltage, short circuit anomalies such as start protection function.
Pieces of LED status indicator, fault alarm output.
Mixer CAN bus communication, and customers to use you then details of the communication protocol.
RS232 communication, and customers to use you then a serial port protocol in detail.
1, the power supply voltage: 10 to 50 VDC.
2, continuous working current 13 a, peak current 30 a.
3, the Out + 5 VDC power supply (power supply) to encoder: 5 v DC 20 ma.
4, analog input range: 0-5 VDC.
5, pulse input range: 500 hz - 5000 hz (corresponding to maximum speed)
note the minimum pulse frequency with different maximum speed Settings will have corresponding change.
6, the duty cycle input range 20% to 80% (f input frequency range 1 KHZ or less, it is recommended to use 250 hz frequency)
7, RC signal (a PWM signal: RC remote control receiver output signal)
8, the digital output interface: 2 road, open drain, maximum load capacity of 40 v 1 a
9, temperature protection status: 70 overheating protection to reduce the output, 85 stop output.
: 10, working environment temperature 25 - + 60
11, environment humidity: relative humidity rh 80 or less.
12, appearance size: L * W * H = 90 mm * 75 mm * 35 mm
13, weight: 185 g
Applications
• Small Electric Vehicles, Electric Bikes
• Electric Boats
• Terrestrial and Underwater Robotic Vehicles
• Automatic Guided Vehicles
• Police and Military Robots
• Hazardous Material Handling Robots
• Telepresence Systems
• Animatronics
• Industrial Controls
• Hydraulic Pumps control
Audited Supplier 
){kind=link}
){kind=link}