| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Closed-Loop |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
III. Product Features:
* Wide-range voltage input, 10-55VDC.
* Intelligent PID control loop.
* Working mode: Speed open-loop, close-loop control, torque close-loop control, position close-loop control.
* External potentiometer, 0-5V analog quantity or pulse command control mode, RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode.
* Safety forward & reverse control, four-quadrant operation, support regeneration.
* Enable control function.
* Maximum current limit.
* 4-way input port; the function can be defined as analog input, pulse input or digital input functions.
* 6-way digital (MOS tube open-drain) output, which can serve as the failure alarm
status output of controller and can control the external relay to realize actions such as automatic disconnection of power.
* Abnormalities like over current, overheating, over voltage and short circuit will start the protection function.
* LED status indicator.
* CAN bus communication, see the detailed communication protocol when using it.
* RS232 communication, see the detailed communication protocol when using it.
IV. Performance Index:
1. Power voltage: 10-55VDC (voltage limit 5V-62V)
2. At the ambient temperature 25ºC, continuous working current 15A, transient current up to 30A 30S.
3. Minimum speed: 10 RPM in the speed close-loop mode; 1 RPM in the position mode.
4. Out +5VDC power (It can power up the encoder): 5V DC 20mA
5. Analog input range: 0-- 5VDC
6. Impulse input range: 500Hz-5000Hz (corresponding maximum speed)
[Note] The minimum impulse frequency may change along with the setting of maximum speed.
7. Input range of duty ratio 0%-- 100% (input frequency range f ≤1KHz, recommend to use the frequency of 250Hz).
8. Temperature protection status: When the temperature is 70ºC, the controller will reduce output by overheating protection and will stop output when the temperature is 80ºC.
9. Working temperature: -30ºC-- +60ºC.
10. Ambient humidity: Relative humidity≤80RH.
11. Boundary dimension: L * W * H = 142mm * 116.5mm * 34mm
11. Weight: 600g
| Model | KYDBL4830-1E |
| Volt | 10-55VDC |
| Rated current | 15A |
| Max current | 30A |
| work mode | Spped mode,Torque mode,Postion mode |
| Feed back |
incremental encoder feedback,hall sensor feedback |
| Control mode | CAN,RS232,PWM,CLK,RC,0-5V,potentiometer |
| Protection | over current,over voltage |
| software | CAN,RS232 |
| Suitable | brushless dc servo motor,brushless servo motor |
| Impulse input range | 500Hz-5000Hz |
| Temperature | -10ºC-- +60ºC |
| Weight | 0.3kg |
| Demension | 185g |
| Application | Fire Robot,Medical robot,AGV,Service Robot |
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory |
Help instal and use the product 24 hours online problem solving |
){kind=link}