| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Open-Loop |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2. Technical performance
1. PWM( pulse width modulation)
2. Speed ratio:1:80
3. Speed control mode: potentiometer(10KΩ/2W)
4. Input impedance:≥50K
5. Speed accuracy: 1 %
6. Soft start time. Soft stop : 0.2-20 seconds
7. Ambient temperature: --10ºC~+60ºC
8. Ambient humidity: Relative humidity≤80RH (non condensing)
9. Instantaneous short circuit protection (50us)
10.Outline dimension: 134*135*70mm
11.Weight: 0.9Kg
13. Adopted SMT technology makes motor controller small size.
14.Current setting and limiting protection
15. ACCEL/DECEL
16.Quick stopping
17.Huge torque at low speed start up.
18.This motor controller is suitable for lanthanide (rare earth)motor, permanent magnet motor and separately excited motor.
| Model | DC24RT50BL |
| Volt | 24VDC |
| Rated current | 30A |
| Max current | 50A |
| work mode | Speed mode |
| Control mode | 0-10V,0-5V,potentiometer |
| Protection | over current,over voltage |
| Suitable | brushed pm dc motor |
| Temperature | -10ºC-- +60ºC |
| Weight | 0.9kg |
| D imension | 135*135*70 mm |
| Application | EQUIPMENTS |
|
1. PULSE WIDTH MODULATION Motor runs quieter, with greater efficiency and less maintenance, longer life. |
| 2. FOUR QUADRANT REVERSIBLE OPERATION |
|
3. REGENERATIVE BRAKING No contactors required. No electromechanical components to overheat or wear out. |
| 4. ENABLE / BRAKE / DIRECTION TERMINALS Choose a function by simply opening or closing a dry contact or through an open collector transistor. |
| 5. STATUS LEDs Power and Fault LEDs provide a visual status of the drive. |
| 6. Forward and reverse can be set separately |
| 7. Output current can be set |
| 8. Braking current can be set |
| 9. Torque compensatio |
| 10. Standard analog control mode: Analog:0-5V or potentiometer |
| 11. Over voltage & less voltage protection |
|
12. OVER TEMPERATURE PROTECTION Drive will fold the output power back to prevent from overheating. Drive will fault if it still remains too hot. |
| Model | Rated volt/V | Rated current | Max current | Controller mode | Regeneration | |
| DC24RT10BL | 12/24/48 | 5A | 10A | Potentiometer, PWM, 0-5V | Yes | |
| DC24RT15BL | 12/24/48 | 8A | 15A | Potentiometer, PWM, 0-5V | yes | |
| DC24RT30BL | 12/24/48 | 15A | 30A | Potentiometer, PWM, 0-5V | Yes | |
| DC24RT50BL | 12/24/48 | 25A | 50A | Potentiometer, PWM, 0-5V | Yes | |
| DC24RT100BL | 12/24/48 | 50A | 100A | Potentiometer, PWM, 0-5V | Yes |
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory |
Help instal and use the product 24 hours online problem solving |
){kind=link}