New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller

Product Details
Customization: Available
Task: Adjust
Structure: Closed-Loop
Still deciding? Get samples of $ !
Order Sample
Shipping & Policy
Shipping Cost: Contact the supplier about freight and estimated delivery time.
Payment Methods:
visa mastercard discover JCB diners club american express T/T
PIX SPEI OXXO PSE OZOW
  Support payments in USD
Secure payments: Every payment you make on Made-in-China.com is protected by the platform.
Refund policy: Claim a refund if your order doesn't ship, is missing, or arrives with product issues.
Secured Trading Service
Gold Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Plant Area
>2000 square meters
  • New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
  • New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
  • New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
  • New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
  • New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
  • New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
Find Similar Products
  • Overview
  • Product Description
  • Detailed Photos
Overview

Basic Info.

Model NO.
KYDBL4830-2E
Signal
Continuous
Function
Automatic Control, Protection
Certification
ISO: 9001, CE
Condition
New
Customized
Customized
Material
PCB
Volt
10-55VDC
Current
30A
Control Method
RS232 Can
Working Mode
Speed Mode;Torque Mode, Position Mode
Warranty
1 Year
Transport Package
Carton
Specification
90 mm * 75 mm * 35 mm
Trademark
keya
Origin
China
HS Code
9032899090
Production Capacity
100000/Year

Packaging & Delivery

Package Size
20.00cm * 20.00cm * 25.00cm
Package Gross Weight
3.000kg

Product Description

New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller

Product Description

III. Product Features:
* Wide-range voltage input, 10-55VDC.
* Intelligent PID control loop.
* Working mode: Speed open-loop, close-loop control, torque close-loop control, position close-loop control.
* External potentiometer, 0-5V analog quantity or pulse command control mode, RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode.
* Safety forward & reverse control, four-quadrant operation, support regeneration.
* Enable control function.
* Maximum current limit.
* 4-way input port; the function can be defined as analog input, pulse input or digital input functions.
* 6-way digital (MOS tube open-drain) output, which can serve as the failure alarm
status output of controller and can control the external relay to realize actions such as automatic disconnection of power.
* Abnormalities like over current, overheating, over voltage and short circuit will start the protection function.
* LED status indicator.
* CAN bus communication, see the detailed communication protocol when using it.
* RS232 communication, see the detailed communication protocol when using it.
IV. Performance Index:
1. Power voltage: 10-55VDC (voltage limit 5V-62V)
2. At the ambient temperature 25ºC, continuous working current 15A, transient current up to 30A 30S.
3. Minimum speed: 10 RPM in the speed close-loop mode; 1 RPM in the position mode.
4. Out +5VDC power (It can power up the encoder): 5V DC  20mA
5. Analog input range: 0-- 5VDC
6. Impulse input range: 500Hz-5000Hz (corresponding maximum speed)
[Note] The minimum impulse frequency may change along with the setting of maximum speed.
7. Input range of duty ratio 0%-- 100% (input frequency range f ≤1KHz, recommend to use the frequency of 250Hz).
8. Temperature protection status: When the temperature is 70ºC, the controller will reduce output by overheating protection and will stop output when the temperature is 80ºC.
9. Working temperature: -30ºC-- +60ºC.
10. Ambient humidity: Relative humidity≤80RH.
11. Boundary dimension: L * W * H = 142mm * 116.5mm * 34mm
11. Weight: 600g

48V 600W Intrllgent Brushless DC Controller RS232 CAN-Open 
Model KYDBL4830-1E
Volt 10-55VDC
Rated current 15A
Max current 30A
work mode Spped mode,Torque mode,Postion mode
Feed back

incremental encoder feedback,hall sensor feedback

Control mode CAN,RS232,PWM,CLK,RC,0-5V,potentiometer
Protection over current,over voltage
software CAN,RS232
Suitable brushless dc servo motor,brushless servo motor
Impulse input range 500Hz-5000Hz
Temperature -10ºC-- +60ºC
Weight 0.3kg
Demension 185g
Application Fire Robot,Medical robot,AGV,Service Robot


New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller

Detailed Photos

 

New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller




New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller


New Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor ControllerNew Kind BLDC Motor Driver for Robotics E-Bike Brushless DC Motor Controller
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier