| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Combination |
|
Still deciding? Get samples of US$ 378/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1. PWM pulse width modulation |
| 2. Speed regulation ratio: 1:60 |
| 3. Speed regulation mode: Model suffix with R01 means speed regulation mode of: Potentiometer (10KΩ/2W)/signal isolator (0-5V,0-10V,4-20mA) Model suffix with B01 means speed regulation mode of: Foot accelerator/the Hall handle |
| 4. Input impedance: ≥10KΩ |
| 5. Working voltage range: ±25% of nominal voltage |
| 6. Soft start time: 1-5 S |
| 7. Ambient temperature: -10ºC~+60ºC |
| 8. Ambient humidity: relative humidity ≤80RH.(non condensing) |
| 9. Current restriction protection |
| 10. Remote start-stop can be realized |
| 11. Applied for permanent magnet, separate excitation and series-excited motor |
| 12. Thermal protection for controller cutting off output in case of overheating for controller to effectively protect controller and traveling crane safety. |
| 13. Able to directly judge source of fault through luminous diode under working condition. |
| 14. Stepless speed regulating and anti-phase braking control |
15. Built-in precharging resistor and polarity protection diode provide convenience for installation and use |
| 16. Under voltage and over voltage protection effectively protects storage battery and all components of controller assembly |
17. 90 seconds no acceleration signal input can automatically cut off the power of contactor magnet coil to save the energy of storage battery. |
| Specification for DC48DP600BL-R01ZC | |
| Input voltage range | DC48V |
| Max output current | 600A |
| 1 hour current | 250A |
| Operating mode | Speed mode |
| Control ways |
Potentiometer (If you need Hall handle, pedal accelerator, 0-5V/0-10V control, please informed us in advance) |
| Protection | Abnormalitise like over current, overheating, over voltage, less voltage and short circuit will start the protection function. |
| Temperature protection | When the temperature is 85ºC, the controller will reduce output by overheating protection and stop output. |
| Working Temperature | -10ºC -- +60ºC |
| Ambient humidity | Relative humidity less than 80RH |
| Weight | 13kg |
| odel | Rated volt/V | 1 hour current | Max current | Controller mode | CW/CCW |
| DC24/36/48/72DP200BL-R01 | 24V 36V 48V 72V | 100A | 200A | Potentiometer, 0-5V | NO |
| DC24/36/48/72DP360BL-R01 | 24V 36V 48V 72V | 140A | 360A | Potentiometer, 0-5V | NO |
| DC24/36/48/72DP500BL-R01 | 24V 36V 48V 72V | 200A | 500A | Potentiometer, 0-5V | NO |
| DC24/36/48/72DP600BL-R01 | 24V 36V 48V 72V | 280A | 600A | Potentiometer, 0-5V | NO |
| DC24/36/48/72DP800BL-R01 | 24V 36V 48V 72V | 380A | 800A | Potentiometer, 0-5V | NO |
| DC24/36/48/72DP200BL-R01ZC | 24V 36V 48V 72V | 100A | 200A | Potentiometer, 0-5V | YES |
| DC24/36/48/72DP360BL-R01ZC | 24V 36V 48V 72V | 140A | 360A | Potentiometer, 0-5V | YES |
| DC24/36/48/72DP500BL-R01ZC | 24V 36V 48V 72V | 200A | 500A | Potentiometer, 0-5V | YES |
| DC24/36/48/72DP600BL-R01ZC | 24V 36V 48V 72V | 280A | 600A | Potentiometer, 0-5V | YES |
| DC24/36/48/72DP800BL-R01ZC | 24V 36V 48V 72V | 380A | 800A | Potentiometer, 0-5V | YES |
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory |
Help instal and use the product 24 hours online problem solving |
){kind=link}